产品特性:耐用 | 是否进口:否 | 产地:河南 |
品牌:海旭磨料 HAIXU ABRASIVES | 型号:40-50# | 种类:玻璃珠 |
规格:40-50# | 材质:钠钙玻璃 | 粒度:40-50#目 |
适用范围:喷丸喷砂 | 莫氏硬度:6-7 | 比重:2.5g/cm3 |
堆积密度:1.6g/cm3 | 成圆率:80%以上 |
伺服电机导轨喷砂料玻璃微珠40-50#即300-400um
玻璃珠是以碎玻璃,平板玻璃等破碎的玻璃砂为原材料,经高温熔融加工而成。
玻璃珠具有低导热、较高的强度、良好的化学稳定性等优点。
主要用于金属,玻璃,橡塑,亚克力等工件的表面喷砂和喷丸处理,可有效保护工件表面不受伤害。玻璃珠的形状为圆球形,在进行喷砂操作的时候不会对工件表面造成划伤,易喷出磨砂的效果。
Glass beads blasting media are made from broken glass sand, such as broken glass and flat glass, and processed by high-temperature melting.
Glass beads(Glass microsphere) have advantages such as low thermal conductivity, high strength, and good chemical stability.
Mainly used for surface sandblasting and shot peening of metal, glass, rubber, acrylic and other workpieces, it can effectively protect the surface of workpieces from damage. The shape of the glass beads is spherical, which will not cause scratches on the surface of the workpiece during sandblasting operations and is prone to producing a frosted effect.
伺服电机导轨喷砂料玻璃微珠40-50#即300-400um的特点:
1、化学成份为惰性二氧化硅无化学活性干扰顾虑
2、圆形弹性微粒,耐冲击,可循环多次,损耗少
3、对喷枪磨耗小,延长喷嘴使用寿命
4、圆球表面,不会损伤加工面及精密尺寸
5、处理后,工件表面光滑,具特殊美感,提高产品价值
6、适合干、湿式喷砂作业
7、金属微细裂痕用细玻璃珠在湿式喷砂后容易显示出来
8、对于加工后的工件具有亚光效果,突出金属本色,不生锈等优点,无须进行酸洗除锈处理
Features of Glass beads blasting media:
1. The chemical composition is inert silica, and there are no concerns about chemical activity interference
2. Circular elastic particles, impact resistant, can be cycled multiple times, with low loss
3. Low wear on the spray gun and extended nozzle service life
4. The surface of the sphere will not damage the machining surface and precision dimensions
5. After processing, the surface of the workpiece is smooth and has a special aesthetic, which increases the product value
6. Suitable for dry and wet sandblasting operations
7. Metal micro cracks are easily visible using fine glass beads after wet sandblasting
8. For processed workpieces, it has a matte effect, highlights the natural color of the metal, and does not rust, without the need for acid pickling and rust removal treatment
典型化学指标 | |
SiO2 | 71.0% |
NaO2 | 14.0% |
Fe2O3 | 0.1% |
Al2O3 | 2.0% |
MgO | 4.0% |
CaO | 7.0% |
磁性物 | ≤0.1% |
其他 | 0.016 |
物理指标 | |
硬度 | 莫氏6-7 HRC:46 |
比重: | 2.5 g/cm3 |
堆积密度: | 1.6 g/cm3 |
反光指数 | ≥1.5 |
成圆率 | ≥80.0% |
磁性物 | 黑色 |
颗粒外观 | 无色透明,无杂质圆球形 |
伺服电机导轨喷砂料玻璃微珠40-50#即300-400um常用型号
型号 | 粒径区间-微米(um) |
20-30目 | 850-600 |
20-40目 | 850-425 |
40-60目 | 425-250 |
50-70目 | 300-200 |
60-100目 | 250-150 |
80-140目 | 180-100 |
100-140目 | 150-100 |
100-200目 | 150-70 |
140-200目 | 100-70 |
140-270目 | 100-50 |
200-325目 | 70-45 |
0-325目 | <44 |
伺服电机导轨喷砂料玻璃微珠40-50#即300-400um用途:
1、 加工航空零件例如飞机涡轮叶片,飞机发动机,发电厂涡轮叶片等,消除其应力,以增加疲劳强度,并减低摩擦和磨损
2、 相机外部,勺子,眼镜,电子面板等的表面粗糙度和光泽度
3、 小弹簧,工具,涡轮叶片,齿轮,轴,活塞头,螺栓/螺母,螺钉等。喷丸处理
4、 去除齿轮,压铸件,飞机精密零件,汽车零件,冲压零件,工具等的毛刺
5、 清洁各种模具,例如塑料,橡胶,铸件,玻璃,压铸件,外壳,模具等
6、 喷砂除锈、除漆、除积碳、除机加工之刀痕
7、 研磨半导体材料
8、 阳极处理和电镀之前处理,除了能清洁外更能增加附着力
9、 不锈钢工件之焊道清洁及表面刮痕之去除等美感加工
10、线割模具之清洁除锈,橡胶模具之除污垢
Applications of glass beads shot blasting media:
1. Processing aviation components such as aircraft turbine blades, aircraft engines, power plant turbine blades, etc. to eliminate their stress, increase fatigue strength, and reduce friction and wear
2. The surface roughness and glossiness of the exterior of the camera, spoons, glasses, electronic panels, etc
3. Small springs, tools, turbine blades, gears, shafts, piston heads, bolts/nuts, screws, etc. Shot peening treatment
4. Remove burrs from gears, die-casting parts, aircraft precision parts, automotive parts, stamping parts, tools, etc
5. Clean various molds, such as plastic, rubber, castings, glass, die-casting parts, casings, molds, etc
6. Sandblasting for rust removal, paint removal, carbon removal, and removal of machining knife marks
7. Grinding semiconductor materials
8. Anodizing treatment and pre-treatment before electroplating can not only clean but also increase adhesion
9. Aesthetic processing such as cleaning the weld bead and removing surface scratches on stainless steel workpieces
10. Cleaning and rust removal of wire cutting molds, and dirt removal of rubber molds